DEX210 Handmade Test Prototype

January 15, 2010

DEX210 handmade test prototype

Filed under: News, Prototype testing — Team Durango @ 12:35 pm

Durango 2wd prototype breaks cover & will be raced at the “Petit” event in Kent this weekend.

The thinking behind the DEX210 is to be the first car where mid & rear motor mounting is possible from the same car, ensuring Durango owners can be sure to have the ideal layout whatever the track.

Private testing has already been carried out with various gearbox configurations & motor locations, but as always Durango like to test properly before finalising the design so off to the Petit race Gerd goes with his hand made car.

◄ Back

Next ►

Picture 1 of 18

D- Durango E- electric X - off road 2 - 2wd 10 - 10th scale

Comments (5)

5 Comments »

[...] Durango [...]

Pingback by RC-Racing NI » Blog Archive » Durango DEX210 2wd buggy prototype — January 15, 2010 @ 3:56 pm
[...] Durango [team-durango.com] & [...]

Pingback by Durango DEX210 2wd buggy 原型车 | RCFans遥控迷模型网 — January 18, 2010 @ 6:41 am
finally, I found your article once again. You have few useful tips for my school project. This time, I won’t forget to bookmark it.

Comment by get tips — January 19, 2010 @ 6:42 pm
I want to let the moment of inertia of the motor work with the 2wd off-roader of the mid ship layout.
Though I want to use the 3.5 – 4.5T brushless motor because the moment of inertia is strong, the gear ratio does not match with the 2wd off-roader such as X-6sq.
The 2wd off-roader with the high-speed brushless motor is too fast, and I cannot control it.
If the inside gear ratio is around 5 from 4,I can use the high-speed brushless motor for the 2WD off-roader.
I suppose that I can drive the 2wd off-roader using the inertia of the motor positively.

Comment by kyoya — January 20, 2010 @ 2:06 pm
I am interested in making a test of the buggy team Durango. that I must make to acquire a prototype

Comment by Javier — February 16, 2010 @ 4:03 am